Ordering Window has Closed! Shipping of this product will take 8 to 10 weeks following closure of the ordering window.

For a limited time, this Engineering / Security Division Red Shirt will be available in the stunt version.

As with other shirts and dresses in our Trek XI line, this costume piece features the iconic delta pattern produced from original screen used pieces created and approved in conjunction with Bad Robot and CBS. Fabric and dye are from the same sources used by production to bring you unequaled accuracy and superior quality.

Priced at $290.95, the shirt itself features a neck piece sewn into the collar to simulate the duty black shirt under layer, as opposed to the Hero-quality version that has a completely separate duty black under shirt.

Don’t just settle for merely being target practice: be the engineer, or be the red shirt that survived the away mission... be beyond your time.

Recreating this costume specifically to put into your hands was a challenging but a highly rewarding experience. Having a close collaboration with Bad Robot and CBS / Paramount Pictures, our production team had the opportunity to not only handle multiple screen used items, but also use Zachary Quinto’s hero screen used outfit as a resource. During the venture we had some remarkable findings, which include: discovering the exact fabric and using the same dying company used for the production. After a few sewing prototypes to get every detail possible, we are proud to present a final product which is almost indistinguishable to the screen used costume / uniform.

Offered for a very limited time, be sure to own Star Trek XI Engineering / Security Division Red Stunt Tunic.

THE PROCESS

Manufacturing:

• Completely crafted in the USA.
• Luxurious red dye replicated by the original production team.
• Pattern created using multiple screen used tops including Zachary Quinto’s.
• Intricate Delta-pattern print process replicated as original.

The Material:

• Authentic heavy-weight spandex and weight used to capture correct draping and flow.
• Elasticity and fabric thickness allows for a modernized but forgiving cut.
• Accurate stitching accent and designs.
• Ribbing detail with accurate piping thickness.
• Finished sleeves with a single rank stripe.
• Comfortable heavy weight cotton poly blend neck dickie sewn into collar.
• ** QMX badge not included but can be purchased separately from www.qmxonline.com

In order to help our customers understand sizes, we've put together this set of instructions. Please feel free to print these out (click here for the printer friendly version), so when you do go to get measured you can use it as a guide.

IMPORTANT: Please refer to this sizing and measurement guide. This will provide the information needed how to properly measure yourself (if you haven’t been measured already) to select a size. Buyer assumes full responsibility of sizes submitted for order. Upon submission of the order, the Buyer absolves ANOVOS of responsibility for incorrect measurements submitted and reserves the right for any exchanges to be made at the complete discretion of ANOVOS.

Please have your measurements taken properly by a professional tailor if possible.

PLEASE NOTE: Sizes taken directly from commercial clothing should not be used as substitution of physical measurements.

How to Measure

Some of the basics in measuring:

1. Keep the tape firm but not tight.
2. Make sure the tape is level around the area you are measuring.
3. Take measurements in inches to determine correct sizing.
4. Round up all measurements to the nearest inch. (Example: 10.5 inches round up to 11 inches.)

How to measure specific areas for fitting:

1. Chest: Measure across the widest part of the chest or across the nipples.
2. Waist: Measure from the navel point around the thinner area of the belly.
3. Neck: Measure around the adams apple of the the neck.
4. Arm Length: With your arm relaxed at side and slightly bent, measure from the center back of the neck, over point of shoulder, down the outside of the wrist.

Click on any of these thumbnails to see a high-resolution photo of the actual ANOVOS product! Note: The Star Trek Insignia pin not included.

Tunic (Front View)

Tunic (Slight Right Profile)

Tunic (Slight Left Profile)

Tunic (Left Profile View)

Tunic (Back View)

Tunic (Chest Close Up)

Tunic (Chest Close Up #2)

Tunic (Style Shot)

Tunic (Neck Close Up)

The pre-order window has closed! Shipping of this product will take 8 to 10 weeks following closure of the ordering window.

For updates on when future pre-orders will be taken, as well as information on our new and exciting products coming this year, subscribe to our newsletter by entering your e-mail address below.